"QUICK SHOWER" tm
OWNERS MANUAL
Manufactured by:
Bishop Enterprise, L.L.C.
www.quickshower.net
“Quick shower” tm
Patented - All rights reserved
WARNINGS, CAUTIONS AND SAFETY
INSTRUCTIONS
For “Quick Shower” tm
(Save these Warnings, Cautions and Safeties)
1. For external use only.
2. Do not use under the influence of drugs or alcohol.
3. Do not use in a bathtub or shower area that does not
have a non-slip surface.
4. Do not use any liquids that are not recommended
for bathing, such as but not limited to the
following:
bleach, ammonias, household cleaners, alcohol,
solvents, acid, flammables, oils, aromatic oils and
other corrosive materials.
5. AVOID ELECTRICAL SHOCK! Do not use with
or near any electrical source.
6. Do not let children or persons with special needs use
unattended.
7. Always run shower or tub water before entering
and always stand or sit on a non-slip surface.
8. Always run in rinse mode first before entering
shower, then adjust to a safe and desirable water
temperature.
9. Never shower on a slippery surface.
WARNINGS, CAUTIONS AND SAFETIES
CONTINUED
10. Never leave in water saver mode for an extended
period of time while showering as this may result
in scalding or burning. Step aside and test water
temperature with your hand before resuming
shower.
11. Keep your eyes and mouth closed when washing
these areas.
12. Do not spray directly into ears.
13. Always turn water completely off when finished at
the water supply control valve on your shower or
tub.
14. Do not use lotions, body scrubs or other abrasives
inside unit.
15. Do not use in a shower or tub that is partially
clogged or stopped up.
16. Do not leave dispenser in water saving mode while
not in shower.
17. Not intended for use on pets, clothes or
dishwashing.
PURCHASER ASSUMES THE RESPONSIBILITY AND LIABILITY TO PASS THESE WARNINGS AND CAUTIONS AND THE INSTRUCTIONS ON TO ANY OTHER USERS AND SUBSEQUENT OR FUTURE OWNERS.
QUICK SHOWER
FEATURES
It is the fastest and easiest way to shower!
Reduces the amount of time spent in the shower and therefore the amount of water used per shower.
It dispenses an adjustable soap and water mixture already lathered.
Detachable soap container with large neck opening for easy refilling with your favorite liquid soap or body wash.
Specially designed to operate with a wide range of water pressures, volumes, and most showerheads.
Only reduces the floor to shower head distance by less than 1 inch ( .75 inch) from its original height.
Separate soap adjustment knob that controls the amount of soap being dispensed.
Separate air adjustment knob that controls the aeration or lathering action of the mixture being dispensed. This feature greatly reduces the amount of soap used per shower.
Once the soap and air mixture is set for the type of liquid soap being used, they do not need to be readjusted. This selected mixture will remain the same shower after shower.
QUICK SHOWER
FEATURES CONTINUED
You can bathe with ease using both hands since you no longer need to hold a bar of soap or bottle of liquid.
If multiple bathers use this unit and do not want to use the type of soap in it, they can still bathe in their usual way.
It is enjoyable and once you have used one you will never want to be without one!
QUICK SHOWER
INSTALLATION INSTRUCTIONS
1. Remove exiting showerhead and any sealant from
shower pipe
2. Install locknut (provided) on shower pipe as far as
possible
3. Remove bottle and showerhead from soap dispenser
4. Carefully screw soap dispenser onto shower pipe by
hand. Do not use teflon tape or sealant. Do not
use tools or wrenches here. Tighten locknut against
dispenser to prevent movement. Do not over
tighten
5. Attach showerhead. Hand tighten.
6. Fill soap container with favorite liquid soap or body
wash.
7. If you would like to use a different showerhead
other than the one supplied, it may be necessary to
remove the flow restrictor from your showerhead
for the unit to work. Please try the supplied
showerhead first. If you have extremely low water
pressure, less that 30 PSI, you may need to remove
the flow restrictor from the supplied showerhead.
It is a small clear silicone o-ring at the female pipe
connection of the showerhead. It is only about ¼
inch in size and is almost invisible. It is easily
removed with a small pointed object such as a
toothpick. (Leave the larger ¾ inch gasket in place
and do not use Teflon tape or sealant).
QUICK SHOWER
OPERATIONS
1. Move large selector lever to the forward rinse
position.
2. Gently turn both the soap and air knobs counter
clockwise into the closed positions. Do not over
tighten.
3. Turn on the water supply and adjust the hot/cold
mixture as usual (no soap is being delivered). Step
into shower and wet down as usual.
4. Move large selector lever to the rear, soap position.
The water volume has now been decreased by about
50 %. (This is done so that the soap is not wasted).
A slight soap mixture might be detected.
5. Adjust soap mixture by turning large knob on your
left clockwise approximately ¼ turn. Adjust as
desired.
6. Adjust air mixture by turning small knob on your
right clockwise approximately 1/8 turn. Adjust as
desired.
QUICK SHOWER
OPERATIONS CONTINUED
7. You can now bath as desired by using both your
hands or a wash cloth whichever you prefer.
8. Move large selector lever forward to rinse position.
TIPS:
1. The large selector lever has a built-in off/trickle
position. It is obtained by stopping the selector
handle halfway between the soap and the rinse
position. At this time the bather is already lathered
and may desire extra scrubbing time without
having to turn off the water supply and re-adjust
the hot/cold supply valve(s). (Do not leave in this
position for extended period of time as this may
result in scalding or burning).
2. When adjusting the soap and air knobs, it might
help you to think of these as a volumn control knob
on a radio: clockwise = incease and counter clock-
wise = decrease.
3. In the unlikely event that soap being dispensed is
inadequate with soap knob fully open, remove the
small restrictor on the bottom of the vinyl tube in
soap container.
